Non risulti loggato.

wcf.regNote.message

DDirk

Admin-Dr.Pulley Spezialist

Posts: 2.816

Data di registrazione: 3. dicembre 2010

wcf.user.option.userOption51: KYMCO, Myroad 700i

Località: Überlingen

Lavoro: Importeur für "Suchtmittel" von Mr.Pulley, TechPulley

wbb.thread.post.credits.thank: 545

  • Invia messaggio privato

8

lunedì, 28. novembre 2011, 09:37

Danke für die Info. Dann bleibts so wies ist.

Würde ich auch so sehen. Wenn du noch die Gleitrampen schön polierst (ATA flüssig o.Ähnliches) , dann flutschen die Röllchen so richtig.
Herzliche Grüße
Dirk


Mr.Pulley/TechPulley Shop, Forum und Blog
Myroad 700i mit Dr.Pulley HIT Kupplung, FR Gleitrollen 26g und Gleitstücken

elgreco111

Intermedio

  • "elgreco111" ha iniziato questa discussione

Posts: 39

Data di registrazione: 24. ottobre 2011

wcf.user.option.userOption51: Yamaha Xmax 400

Località: Wien

wbb.thread.post.credits.thank: 11

  • Invia messaggio privato

7

lunedì, 28. novembre 2011, 09:27

Hallo Dirk !

Danke für die Info. Dann bleibts so wies ist.
LG

Stevie

DDirk

Admin-Dr.Pulley Spezialist

Posts: 2.816

Data di registrazione: 3. dicembre 2010

wcf.user.option.userOption51: KYMCO, Myroad 700i

Località: Überlingen

Lavoro: Importeur für "Suchtmittel" von Mr.Pulley, TechPulley

wbb.thread.post.credits.thank: 545

  • Invia messaggio privato

6

lunedì, 28. novembre 2011, 09:18

Vielen Dank, Stevie! Ich habe mittlerweile auch Nachricht von Dr.Pulley bekommen, für die Roller mit 20x15 Rolle ist leider keine Vario verfügbar. Bleiben Malossi oder Polini. Wobei ich ehrlich gesagt das geld sparen würde, denn die kosten ja richtig Geld. Und so viel mehr bringt es beim 125er auch nicht. Der Downtown 125 ist da die Ausnahme, weil die Originalvario absolut nichts taugt.
Herzliche Grüße
Dirk


Mr.Pulley/TechPulley Shop, Forum und Blog
Myroad 700i mit Dr.Pulley HIT Kupplung, FR Gleitrollen 26g und Gleitstücken

wbb.thread.post.thank.stats

wbb.thread.post.thank.users

elgreco111 (28.11.2011)

elgreco111

Intermedio

  • "elgreco111" ha iniziato questa discussione

Posts: 39

Data di registrazione: 24. ottobre 2011

wcf.user.option.userOption51: Yamaha Xmax 400

Località: Wien

wbb.thread.post.credits.thank: 11

  • Invia messaggio privato

5

domenica, 27. novembre 2011, 20:14

Hallo !

Also : Lt. Vorlage sind die Maße der Vario: F = 126 mm, B = 27, C = 16, A = 126 für den äußeren Ring, der innere Durchmesser ist 107 Außenkante bzw. 96 Innenkante, Zähne sinds 21.
LG

Stevie

wbb.thread.post.thank.stats

wbb.thread.post.thank.users

rayman282 (27.11.2011), DDirk (28.11.2011)

DDirk

Admin-Dr.Pulley Spezialist

Posts: 2.816

Data di registrazione: 3. dicembre 2010

wcf.user.option.userOption51: KYMCO, Myroad 700i

Località: Überlingen

Lavoro: Importeur für "Suchtmittel" von Mr.Pulley, TechPulley

wbb.thread.post.credits.thank: 545

  • Invia messaggio privato

4

giovedì, 24. novembre 2011, 16:54

Leider nein, meine Anfrage ist noch offen. Ich melde mich aber gleich nach Erhalt der Antwort. Falls du deine Vario noch mal öffnen solltest, kannst du es aber auch selbst prüfen: Hier ist eine Datei mit den Maßen der Varios. Anzahl der Zähne etc. Vielleicht findest du da die passende?
Herzliche Grüße
Dirk


Mr.Pulley/TechPulley Shop, Forum und Blog
Myroad 700i mit Dr.Pulley HIT Kupplung, FR Gleitrollen 26g und Gleitstücken

elgreco111

Intermedio

  • "elgreco111" ha iniziato questa discussione

Posts: 39

Data di registrazione: 24. ottobre 2011

wcf.user.option.userOption51: Yamaha Xmax 400

Località: Wien

wbb.thread.post.credits.thank: 11

  • Invia messaggio privato

3

giovedì, 24. novembre 2011, 09:27

Hallo Dirk !

Hats Du bezüglich Variomatic schon was erfahren ? Eilt nicht, momentan ist Winterruhe ;-) Umrüstung hab ich dann für Frühjahr vor
LG

Stevie

DDirk

Admin-Dr.Pulley Spezialist

Posts: 2.816

Data di registrazione: 3. dicembre 2010

wcf.user.option.userOption51: KYMCO, Myroad 700i

Località: Überlingen

Lavoro: Importeur für "Suchtmittel" von Mr.Pulley, TechPulley

wbb.thread.post.credits.thank: 545

  • Invia messaggio privato

2

martedì, 22. novembre 2011, 13:08

Hallo Stevie,
so wie deine Vario aussieht, würde ich auch an einen Austausch denken.Du kannst die Originale nehmen, die kostet komplett etwa 100€.
Fürs etwa das gleiche Geld bekommst du aber auch die ganz neue verbesserte Tuningvario von Dr.Pulley. 2 Fahrer haben sie gerade im Test in ihrem Downtown 125 (Typ V181405 )und sind bisher hoch zufrieden. Ich muss noch abklären, welche bei dir passt. Du hast ja 20x15 Rollen drinnen, also der LC Motor.
Herzliche Grüße
Dirk


Mr.Pulley/TechPulley Shop, Forum und Blog
Myroad 700i mit Dr.Pulley HIT Kupplung, FR Gleitrollen 26g und Gleitstücken

elgreco111

Intermedio

  • "elgreco111" ha iniziato questa discussione

Posts: 39

Data di registrazione: 24. ottobre 2011

wcf.user.option.userOption51: Yamaha Xmax 400

Località: Wien

wbb.thread.post.credits.thank: 11

  • Invia messaggio privato

1

martedì, 22. novembre 2011, 12:17

Kombination Variomatic - Pulley Rollen/HIT Kupplung

Hallo !

Ich schon wieder :-) Irgendwann werd ich die original Variomatic tauschen. Frage : Gibts von Pulley entsprechende Modelle, bzw. welche Fremdhersteller (z.B. Polini,Malossi,..) passen mit den Pulley Rollen/HIT Kupplung zusammen ?
LG

Stevie

Contatore:

Visite di oggi: 100.205 | Visite di ieri: 236.096 | Record visite: 348.241 | Visite totali: 113.820.319

wbb.portal.box.customBox12.title

wbb.portal.box.customBox8.title

wbb.portal.box.customBox2.title

wbb.portal.box.customBox9.title

wbb.portal.box.customBox10.title

Die Dr.Pulley Spezialisten helfen beim Einbau
BRATHAHN in D-21493
QUADFIRE in D-36355
RAYMAN282 in D-49196

wbb.portal.box.customBox11.title

wbb.portal.box.customBox6.title

Bookmark and Share